HS6103 Single Phase Electricity Meter Test Bench
Technical Parameters
1. Accuracy class:0.05/0.1/0.2
2.Reference standard meter: HS-5100 single phase wide-range standard meter accuracy class:0.05/0.1 Multi-path voltage transformer: accuracy class:0.01,rated load per path:10VA
3.Voltage Output:220V(240V option),output range:0-125%, ajusting fineness:0.01% full range
4.Current Output:0.1-100A(200A optional),output range:0-120%, ajusting fineness:0.0001A(min)
5.Phase angle:0-360° ajusting fineness:0.01°
6.Frequency:45Hz-65Hz, ajusting fineness:0.01Hz
7.Output waveform distortion: Both voltage and current<0.5%
8.Output voltage,current and power stability:<0.05%/3min
9.Output capacity: Current 1000VA(120A),voltage 400VA(24 meters testing stations) when the number of meters to be tested increases, its maximum load can be extended to current 1800VA, and voltage 1000VA
10.Load characteristics: resistive,inductive and capacitive( less than 4 uF)
11. Starting current output:5mA(Min),accuracy:5%,starting power: accuacy 5%
12. Number of energy meters to be tested:24/48(standard),also3/60 meter testing stations are available
13.Testing functions:accuracy testing,creep testing(on load testing),starting up testing,harmonic testing, repeatability testing,error testing etc.
14. Input power supply:220VAC±10%,50Hz, Max.power consumption :1500VA(24 meters testing stations)
Main Information:
| No. of test Meters | Standard: 24 and 48 ,Also 3-60 Meters are available |
| Accuracy Class | 0.05% or 0.1% |
| Output Voltage | 220 or 240V,Range:0~125% |
| Output Current | Standard: Max120A Custom: 200A |
| Test Function | Accuracy testing, creep testing(no load testing), starting Up testing, harmonic testing, repeatability testing, influencing testing, dial testing etc. |
| Communication Mode | 1.Bus
2.Seperated Communication Port(MOXA and Serial Port Server) |
