HS-3103 Portable Single Phase Energy Meter Test Bench
HS-3103 serial products are small-sized, light-weight three-phase equipment; they adopt SPWM power amplifier technology, equip with high accuracy digital reference standard meter, MSPT etc., to operate high precise energy error calibration. They also equip with PC control software and offer whole solution scheme for energy meter automatic calibration, also can supply DLL for second research; greatly improve user’s control and manager ability to equipment.
HS-3103 serial products are widely used in many sectors to test and calibrate energy meters, such as in electric power sector, transportation sector and so on, also used in energy meter factories and suitable for all kinds of single-phase meters,multifunction single-phase meter,smart single-phase meter. It is small-sized, easy to move and operate.
Functions Advantage
- Based on A/D and DSP technology
- Use DDS and SPWM technology
- Equip with smart system control technology and CPU
- Precise error processing technology
- SPWM power amplifier, huge content, high performance, and low consumption, automatic alarm
- Each station has an error processor, anti-high electric power
- Modules design, easy to install and debug
- Automatically finish testing according to scheme through one-click
- Aluminum frame, beautiful and strong
- Customized according to the customers’ requirements
- Small-sized, light-weight, and big output power
- Flexible operation, can control each output factor fast
Technical Parameters
| Item | 0.05 | 0.1 |
| Accuracy | HS-5100 0.05/
TC-3000C 0.05(embedded) | HS-5100 0.1/
TC-3000C 0.1(embedded) |
| Range | voltage:20～300V current:5mA～120A |
| Phase | 0～360°, resolution:0.01° |
| F | 45～65Hz ,resolution:0.01Hz |
| THD | voltage,current＜0.5%(linear load) |
| Power stability | ＜0.05%/120s | ＜0.1%/120s |
| Output content | Voltage:50VA current:100VA(100A) |
| Load characteristic | resistive,inductive,capacitive(less than 1uF/each station) |
| Starting up current | Min.2mA,Accuracy:5%,starting up power: accuracy 5% |
| Pulse input | ≤1kHz |
| COM. test | RS485/232/IR/carrier,support DL/T645-1997/2007,IEC1107 |
| Tested meter | 1～3 |
| Work conditions | Temp.:20℃±5℃； Humidity:＜85% R.H. |
| Input power | AC220±10%,50/60Hz,(AC120V optional);Max. consumption:500VA |
Model
| Model | Name | Application |
| HS-3103 | single-phase energy meter portable equipment | commissioning,maintenance,development |
| HS-3103B | single-phase energy meter movable equipment | development,calibration |
Functions
| Item | HS-3103 | HS-3103B |
Basic
Functions | basic error | ● | ● |
| creeping test | ● | ● |
| starting up test | ● | ● |
| standard deviation | ● | ● |
| constants test | ● | ● |
| dial error | 〇 | 〇 |
| influence test | 〇 | 〇 |
| others | daily timing error ☆ | | 〇 |
| GPS☆ | | 〇 |
| COM. test ☆ | | 〇 |
- :●─Standard；〇─Selection.
- means special functions
Configuration
| Model | HS-3103 | HS-3103B |
| reference standard meter | ● | ● |
| signal source | ● | ● |
| error process system | ● | ● |
| meter rack | 〇 | |
| clock tester | | 〇 |
GPS | | 〇 |
| optical sampling | 〇 | 〇 |
