HS-6103F SINGLE PHASE ENERGY METER TEST BENCH
AUTOMATIC CHANGE TO CALIBRATE/TEST LINE AND NEUTRAL
This specification for single phase dual loop energy meter test bench.
Voltage Source:
1. Output Voltage Range: 0- 275/300V
2. Output Max Power: 800VA
3. Resolution: 0.01%
4. Stability: Better than 0.05% / 3 Min(Time base 5S)
5. Distortion factor: < 0.5% at linear load;
6. Frequency range: 45Hz~65Hz;
7. Power efficiency: more than 85%;
8. Ambient temperature:10℃~50℃
9. Electronic overload and short-circuit protection.
Current Source:
1. Output current: range: 1mA~100A;+/-20%
2. Output maximum power: 2000VA
3. Resolution: 0.01%;
4. Stability:better than 0.05%/3 min(time base 5S);
5. Distortion factor: < 0.5% at linear load;
6. Frequency range: 45Hz~65Hz;
7. Power efficiency: greater than 85%;
8. Ambient temperature:10℃~50℃
9. Electronic overload protection and security for open current circuit.
Reference Meter:
HS-5100 Single Phase Reference Meter Accuracy class :0.05%
Accessories:
1. Phase Angle: 0°~360° , resolution of phase angle setting: 0.1°;
2. Output frequency range: 45Hz~65Hz; resolution: 0.01Hz
3. Output stability of power: <0.05% (180S)
4.. Input power: 220/240V +/-15%, 50/60Hz;
5. RS485 Communication Capacity.Universal Serial Bus
6. Current Connect Type: 1-4,3-2 (Dual Loop)
Dimensions
| Integration | Positions | Racks | Dimension |
| L×W×H(mm) |
| 6 | 1 | 1600 ×750× 1600 |
| 12 | 1 | 1600× 750× 1920 |
| 24 | 1 | 2200× 750 ×1920 |
| 32 | 2 | 1800× 750 ×1920 |
| 40 | 2 | 2000× 750× 1920 |
| 48 | 2 | 2200× 750 ×1920 |
| Fission | Positions | Racks | Dimension |
| L×W×H(mm) |
| 24 | 1 | 2200 ×700× 1920 |
| 32 | 1 | 1800× 700× 1920 |
| 40 | 1 | 2000× 700 ×1920 |
| 48 | 2 | 2200× 700 ×1920 |
| 60 | 2 | 2000× 700× 1920 |
| Cabinet | 600 ×800× 1600
|
HAIYAN SHENGDI ELECTRICAL TECHNICAL CO.,LTD
CONTACT: YELI
Tel/Fax: 0086-573-86161698
EMAIL: hysdsales@gmail.com
SKYPE: lily19850618
