HS3103 Portable 1 Phase Energy Meter Test Equipment
Technical specification
1. Electrical output
1) Voltage and current measurement range
Output voltage ranges: 57.7V/63.5V and 220V/240V (480V option)
Output current ranges: 0.1A, 1A, 5A, 20A, and 100A
2) Output load capacity
Voltage loop: Max. 50VA
Current loop: Max 100VA (Measurement range 100A)
2. Electrical output adjustment
1) Voltage adjustment
a) Adjustment range: 0%~125% selected voltage range
b) Adjustment fineness: four finenesses as 10%, 1%, 0.1%, and 0.01% are
available
c) Max. output voltage: 300V or 600V
2) Current adjustment
a) Adjustment range: 0%~120% selected current range
b) Adjustment fineness: four finenesses as 10%, 1%, 0.1%, and 0.01% are
available
c) Max. output current: 120A
3) Phase adjustment
a) Adjustment fineness: 0°~359.99°
b) Adjustment fineness: four finenesses as 10°, 1°, 0.1°, and 0.01° are
Available
3. Voltage and current output distortion
This device’s voltage and current output distortion will not be more than 1%
(testing under linear load)
4. Output power stability
This device’s pre-set output power will not exceed 0.05% compared with the
measurement range variation within 180S.
5. Harmonic content
a) Number of harmonic waves: 2~31
b) Harmonic content: less than 40% (compared with fundamental wave)
c) Harmonic phase: 0°~359.99°
6. Monitoring instrument
To be read directly from the standard meter.
7. Electric pulse
Electric pulse output from standard meter:
1) For error calculator to calculate the error of any meter to be tested;
2) For the reference of upper-level measurement examination and
determination agency when sending the standard meter to them for testing.
Please refer to standard meter’s Table of Constants for pulse constants.
8. Power supply
Single-phase AC 220V/240V (100V/110V/230V is also applicable), 50/60Hz,
max. input power consumption: 500W.
Contact: Yeli
Email: hysdsales@gmail.com
Skype: lily19850618
